creating new font color cache entry 00389416. creating new font color cache entry 00bab329. creating new font color cache entry 2200071e. do not start tvsystem wizardĭont run Timezone Setup. You may start a HTTP session now if you send a "break ". Linux/PPC load: console=null root=/dev/mtdblock3 rootfstype=jffs2 rw Usbdevfs /proc/bus/usb usbfs defaults 0 0įilesystem Size Used Available Use% Mounted on Im including some of the information on the working dm500+ box to discern whether its more /etc/fstabĭevpts /dev/pts devpts mode=0620,gid=5 0 0 I realise this could brick the box but im willing to give it a try and jtag later if necessary. I would of course want to extract the bootloader from the dm500+ first just in case :-O & cd /tmp eraseall /dev/mtd/2 cp mtd2_bootloader.img /dev/mtd/2 reboot To flash it to your box, unrar it and ftp it to /tmp - then telnet this command: I think extracting the dm500s bootloader would be like thisĬat /dev/mtd/2 > /tmp/mtd2_bootloader.img If that theory is flawed i think it still may be able to be done by jtagging and restructuring the flash layout. (the box reports its type as DM500+ and the nfi file has its file format and boxtype in its header to make sure nfi is used for DM500+)Īs the boxes are so alike my theory is that if i extract a working dm500s bootloader and overwrite the existing one on the dm500+ then i should be then able to flash Commando on it. The dm500+ also uses nfi image files and not img files, thus when connected to DreamUp you can only flash nfi files They have the same processor & chipset and the primary difference is that the dm500+ has more flash & ram ( 32 MByte Flash, 96 MByte RAM) I already have a working dm500s (running the neutrino image Commando), I also have the dm500+ running Gemini4.7 so I am including I would need a similar layout for the dm500+, so would likely just need to remap and ignore and additional I am attaching the partition layout for the Commando Image as used on a dm500s. Is anyone willing to give some advice as to if this is possible ? I know that the bootloader is different for these models and the DM500+ uses nfi not img image filesīut as the Processor and Chipset are the same should it not be possible to put the DM500s bootloader The image I would like to use however is the Commando Image for a DM500s, which is Neutrino based. I inherited a DM500+ and I would like to change the image on it.
0 kommentar(er)
